COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
INST_DOS
v1.21
Personal NetWare Install
No help available
The MS Windows path given does not point to a valid MS Windows directory. Please enter a valid MS Windows directory.
AUTOEXEC.BAT
AUTOEXEC.BNW
AUTOEXEC.NEW
@CALL %sSTARTNET
PATH %s
PATH %s;%%PATH%%
Insert the %s into drive %s or press <Alt> <F10> to exit install.
CONFIG.SYS
CONFIG.NEW
CONFIG.BNW
Highlight setting and press <Enter>. Press <Esc> to cancel.
LASTDRIVE=Z
Highlight setting and press <Enter>. To select multiple settings press <F5>. Press <Esc> to cancel.
Enter a value between %s and %s, then press <Enter>. Press <Esc> to cancel.
STARTNET.BAT
STARTNET.BNW
NET.CFG
NET.BNW
PROGMAN.INI
A newer version of file %s already exists on the destination drive.
We recommend using the file on the install disk, even though it is older, to maintain compatibility with other install files.
PROGMAN.BNW
Group%d=%s%s
No more help is available.
Use version on installation diskette?
Install could not locate the MS Windows SYSTEM directory. It has created a SYSTEM directory under your MS Windows directory and will copy files to it.
%s was detected as the Network ODI driver, this driver has been updated and renamed to %s. Answer "Yes", to use the updated driver or "No" to keep %s.
Insert the target diskette (the diskette you are installing to) into drive %s.
MS Windows Directory:
If you choose YES, then these files will be modified. Otherwise you will have to make the changes by hand.
Network Board Driver:
The function keys on your machine are:
Exits help.
Lists the function keys on your machine.
Highlight here and press <Enter> to install.
<<< BAD MESSAGE >>>
INSTALL NOW
Without the proper installation files, your network board driver cannot be installed.
After installation is complete, the driver must be placed in the client directory, and the NET.CFG and STARTNET.BAT files may need to be configured for the driver.
Press <Enter> now to set a shared MS Windows path or to set a file copy option.
The following keys are available while viewing help:
%s is being copied.
Use DPMS to put server in extended memory? If you have extended memory, this option will free up some conventional memory.
Do you still want to set the shared path?
Moves to the next help screen.
ERROR: This computer is out of memory. The installation process cannot be completed.
Insert the diskette containing Network Board Drivers with .INS install files into drive %s or press <Alt> <F10> to exit install.
Network Board
ERROR: The disk is full. The installation process cannot be completed. Please create more free disk space and run the install utility again.
ERROR: The file %s could not be found on the source drive. It cannot be copied.
ERROR: Source file %s can not be opened because there are no free file handles. It cannot be copied.
ERROR: Permission to open source file %s was denied. It cannot be copied.
ERROR: Destination file %s could not be opened because there are no free file handles. It cannot be copied.
ERROR: Permission to open destination file %s was denied. It cannot be copied. You may manually copy it from the distribution disk and run NWUNPACK to decompress it if needed.
The %s drive is not ready or error accessing file.
Press <Alt> <F10> to exit or
The Install Utility was unable to copy %d of the files it attempted to install.
Enter-continue Alt F10-quit
ERROR: MS Windows is running on this machine. Please exit MS Windows and run INSTALL from the DOS prompt.
Please insert the driver diskette that has the current driver on it into drive %s.
The disk must have the files %s and %s on it.
Press <Enter> when ready or <Escape> to cancel.
Insert The Driver Disk
Please insert a driver diskette into drive %s. A driver disk must have the file DRIVERS.DOS or INS files (<drivername>.INS) for each of the drivers on the disk.
OTHER DRIVERS
Esc-cancel Enter-select and continue Up/Down Arrow-move Alt F10-quit
Network Board Driver has been successfully configured for the standard parameters. If your driver uses custom parameters, please review the configuration by reselecting the driver.
The DOS path must include a valid drive letter, for example "C:".
An invalid drive was given in path.
Highlight here and press <Enter> to see list.
FILES=40
Esc-cancel F5-select Enter-continue Up/Down Arrow-move Alt F10-quit
Old NetWare Utilities for MS Windows exist on this machine.
You should delete the file %s. Also, the old ICONS in Program Manager can be deleted.
VeRsIoN=v1.21
(none)
Insert the %s diskette or your third party driver diskette. A driver diskette must have the file DRIVERS.DOS or have an INS file for each of the drivers on the disk.
If the driver disk can be found in a different place, type the new path below:
Insert the %s diskette or your third party driver diskette. The diskette for the current driver must have the files %s and %s on it.
The Install Utility is finished.
Please note:
SM_DEFAULT_MESSAGE
Cancel Changes?
Answer Yes if you want install and optionally customize NetWare client support for MS Windows.
Configure TSA for Storage Management Services (SMS)
Change the values above to match your network board settings. Highlight the value and press <Enter>. Press <Esc> when you are finished. (Note: Avoid I/O Base Address 360 if you have a parallel printer, and Interrupt Request 3 if you have a device using COM2, such as a fax, mouse or modem.)
SPECIFIC HELP FOR THIS DRIVER:
The Driver selected could not be found on the disk. A different driver must be selected.
%s has detected a driver for your network board already installed on this machine.
Drivers
Change destination path?
1. AUTOEXEC.BAT and CONFIG.SYS were updated. Your original AUTOEXEC.BAT and CONFIG.SYS were saved as AUTOEXEC.BNW and CONFIG.BNW.
WARNING: Disk %c has LOW HARD DISK SPACE
Hard Disk %c: has %ld bytes of free space. Personal NetWare requires the following amounts of disk space:
Personal NetWare with utilities for MS Windows requires %dMB
Personal NetWare without utilities for MS Windows requires %dMB.
File copy status:
Esc-continue Enter-select Up/Down Arrow-move Alt F10-quit
ERROR: Destination file %s could not be opened. It cannot be copied.
NetWare Client Install
1. Enter the destination directory:
You do not have sufficient rights to write to the network directory you specified: %s.
If you are running a shared copy of MS Windows, then you or your network administrator will need to:
1. Copy files from the personal SYSTEM directory to the root of the shared windows directory.
2. Create a directory named NLS off the root of the shared WINDOWS directory. Copy the contents, including subdirectories, from the NLS directory under your personal windows directory to the shared WINDOWS\NLS directory.
3. Then, delete the contents of the personal NLS and personal SYSTEM directories and remove the directories.
Ask everytime?
Go Back
Edit/Select
TSA Workstation Name
Enter MS Windows directory:
1. The %sAUTOEXEC.NEW and %sCONFIG.NEW files should be used to replace AUTOEXEC.BAT and CONFIG.SYS.
or press <Ctrl><Alt><Delete> to restart your workstation and load the networking software.
Returns to the previous help screen.
2. The Install Utility created or modified the NET.CFG and STARTNET.BAT files in the client directory, and the WIN.INI, SYSTEM.INI, and PROGMAN.INI files in the windows directory. The previous contents of these files have been saved with .BNW extensions.
2. The Install Utility created or modified the NET.CFG and STARTNET.BAT files in the client directory. The previous contents of these files have been saved with .BNW extensions.
Press <Enter> to exit to DOS
TSA Server Name
Do you want install to ask every time or do you want to replace all newer files with files from the installation diskette?
Allow changes to DOS system files (AUTOEXEC.BAT and CONFIG.SYS)?
^^^^AZ09__--
^^^^AZ09__--::!!#)./@@\\``{{}}^^~~
WARNING: Disk %c has low disk space; only %ld bytes of free space is available.
Please verify that you want the client on this disk.